Forums

Pages: [1]
Author Topic: A Specific sv_airaccelerate needed for jumping?  (Read 1264 times)
Soldier
***

Posts: 216
Hi
Well i know theres one for surfing but there are some jumpers in my area saying the airaccel needs to be a 150


---------------------------
Hi
   
Offline  CrancK
Rocketeer
*

ehh... what?
Posts: 397
dude...
for jumping? as in rocketjumping or stickyjumping?

if any of those 2, then normal airaccelerate is what is normally used



---------------------------
   
Offline  Yami
Rocketeer
****

Posts: 252
What's the default airaccel anyway?
   
Fly
**

Posts: 97
Registered as Special43004 but playing as Kandrix
default airaccel is 1; setting it to 150 is good for more effective strafe (ex. jump quba 1st jump on hardest). also rocketsurf is quite impossible without airaccel (ex. jump_baqu_a2 course 2 jump #4)

Hope this helped


---------------------------
New acc

Old acc
   
Rocketman
*****

Posts: 630
also rocketsurf is quite impossible without airaccel (ex. jump_baqu_a2 course 2 jump #4)

Hope this helped

Uhh... assuming you mean course 1 of baqu (not including the quba 1) those aren't surfs, they're just ramp slides, you use your rockets to accelerate and launch between ramps.  Default airaccel.
   
Soldier
***

Posts: 216
Hi
All jurf jumps in baqu are possible without extra airaccel


---------------------------
Hi
   
Fly
**

Posts: 97
Registered as Special43004 but playing as Kandrix
rly? maybe i have bad experiences about this from surf servers..


---------------------------
New acc

Old acc
   
Offline  kawaii
Maggot
*

Posts: 24
default airaccel is 1; setting it to 150 is good for more effective strafe (ex. jump quba 1st jump on hardest). also rocketsurf is quite impossible without airaccel (ex. jump_baqu_a2 course 2 jump #4)

Hope this helped

bump

default airaccel = 10
default airaccel for surfing (widely used for skillsurf) = 150
   
Offline  dellort
Rocketeer
****

Video Maker Extraordinaire
Posts: 294
and default airaccel for trick surf is 1000
   
0 Members and 1 Guest are viewing this topic.
Pages: [1]
« previous next »


spirit Powered by SMF 2.0 RC5 | SMF © 2006–2011, Simple Machines LLC